If you are wondering what the red key light on a Harley Davidson means, you’ve come to the right place. There are many common warning lights on Harleys, and these warning lights will be present when you buy your motorcycle off the lot as well as once you’ve ridden it for a thousand miles. Read on to learn more about these lights and what they mean. Also, keep these tips in mind when troubleshooting the security system.
Troubleshooting a Harley Davidson security system
Having trouble with your Harley Davidson security system? Here are some troubleshooting tips. First, make sure that you have the right PIN code for your system. A valid PIN will be shown in flashing lights. If you cannot find your PIN code, press the red button on the security screen. If you do not have the right PIN code, you can disable the security system by pressing the flashing red button.
Next, check the status of your security system. If you have the key fob, it should be working properly. If it is not, you may need to reset it. This will reset the system. It is important to have the correct PIN and key fob in order to use the security system. If you cannot find the key fob, you can consult the owner’s manual for additional information.
Turning off the hazard lights
When to turn off the hazard lights on a motorcycle is a personal choice. They can cause the biker to appear to be speeding and can also confuse other drivers. Generally, motorcycle hazard lights should only be used at a stop and should never be used while you’re moving, as they can be confusing for other drivers behind you. Motorcycle hazard lights are controlled by two switches. One switch controls flashing, while the other controls the running warning light.
If the hazard lights on a Harley don’t work, there are a few possible reasons. First, there’s a loose wire. You can check this with a test light or wiring diagram. You can also check the bulb. Alternatively, the turn signal switch could be the problem, and you can use a test light to confirm this. Finally, if the indicator isn’t working, you can check the wiring of the turn signal switch.
Activating the security system
If you want to activate the security system on your Harley Davidson motorcycle, you’ll need to push the right turn signal button while the ignition is running. Once the system is activated, you’ll enter your PIN code on the security system computer screen and a new digit will replace the old one in your odometer. You’ll need to place this new PIN in the control module inside the bike to prevent anyone from detaching it. This security system will also have a key fob, siren, or pager.
To activate the security system on a Harley Davidson motorcycle, first turn the ignition off and then push the odometer reset button or toggle switch on the left control mount. Once the odometer is reset, the indicators and background lights should come on. If you don’t have a keychain, you can try to fix the problem yourself online. Alternatively, you can take your motorcycle to a dealership and get it fixed.
Activating the diagnostic feature
The diagnostics feature on a Harley-Davidson motorcycle is a great way to diagnose issues with your bike. Some models can display trouble codes without the use of a tool, but some do not. To activate the diagnostics feature on your Harley, simply hold the trip reset button while turning the ignition on and off. The bike will cycle through all of the trouble codes until you’ve found the one that’s causing the problem. To clear the trouble codes, you must drive the bike enough times before they return.
When your Harley shows the check engine light and you notice a list of trouble codes, it’s time to get it checked out by a qualified mechanic. Although you can clear the DTCs using the onboard diagnostics, it’s recommended that you consult your local Harley-Davidson dealership or qualified technician. You should never try to clear the DTCs yourself before visiting a mechanic. Rather, you should let the technician work through the problem to determine the underlying problem and resolve it.