There are several methods of how to wash a Harley-Davidson motorcycle. Some of the most common methods are high-pressure soap, sponge, and exhaust blocking. After washing, you should dry the motorcycle with a leaf blower or an air blower. These methods will leave the bike looking brand-new, and it will keep its value for years to come. Here are some helpful tips:
If you’re interested in cleaning your bike but don’t know how to use high-pressure soap, you’re not alone. Harley owners say their motorcycle is like their best friend, and it’s not surprising. Having a Harley that looks and feels great can be priceless, so it’s essential to learn how to wash it properly. Listed below are some tips. First, always use a quality cleaning product. Don’t use anything harsh on your bike, or you might end up damaging it. Make sure to wear rubber gloves when cleaning with harsh chemicals, and keep an old toothbrush handy for those hard-to-reach parts of the bike.
Use a special motorcycle soap made for motorcycles, such as Griot’s Car Wash. Unlike dish soap, this kind of soap is safe for hot or dirty bikes, and will not harm the finish. Never use dish soap to wash your bike, as this will strip the wax and will damage the paintwork. Also, make sure you rinse your bike thoroughly, and never use cold water. After the bike is clean, make sure to dry it thoroughly and check all parts to make sure they’re working properly.
Using a sponge
While it’s easy to pick up any old sponge and use it to wash a Harley Davidson, it’s also important to know what to use when washing it. To prevent spotting, you should use a high-quality motorcycle wash mitt, which comes in both large and small sizes, and is machine-washable. This wash mitt offers the ideal level of absorbency for cleaning your Harley without damaging the finish. You can also try a bug-eater sponge, which is specially designed to help remove dried bugs without damaging the surface.
Before washing your motorcycle, remove any plastics from the pre-wash process. Let the motorcycle sit while you prepare the cleaning area. While cleaning, ensure that all working components are operating correctly before rinsing. If you are unsure of what method is right for your bike, try a few techniques and see which one works best. By following these simple steps, you can keep your bike looking shiny and clean throughout the summer.
Blocking the exhaust
Before you begin washing your Harley Davidson, block the exhaust pipe. This can be done with a rubber plug, rag, or glove. The purpose is to keep water from leaking out of the exhaust and pooling in the pipe. If the exhaust is angled, this could result in the water pooling inside the pipe. Using a rubber plug will help prevent this. After the exhaust pipe is blocked, you can wash the bike as normal.
Before starting the process of blocking the exhaust, you must unbolt all of the nuts and bolts attached to the system. You may have to remove the head pipe and muffler to gain access to the pipes. Alternatively, you can remove the muffler and block it with the head pipe. If the original equipment pipes are still attached, you can store them in the attic or garage until they are no longer needed. To avoid corrosion, you should coat the original equipment pipes with a product designed for exhausts.
Using a leaf blower/air blower to dry
If your Harley Davidson gets wet after a ride, using a leaf blower can dry it completely. The air flow from a leaf blower is concentrated, and it can be used to dry recessed bolt heads or other hard to reach areas. It’s also great for polishing your bike, because you’ll end up with minimal water marks, and the machine will not evaporate water or leave mineral deposits.
If you’ve ever washed your bike with water, you’ve probably tried using a leaf blower to dry it after washing. This method isn’t recommended unless you have a very large amount of water to dry. You’ll want to use a much smaller blower to get the job done. While a high-quality air blower will be effective, a leaf blower can be more effective than an air dryer for drying a bike.
Polishing the body
When preparing your bike for a Harley Davidson concours, polishing and sealing it are essential to its overall look. A well-polished Harley is more resistant to dirt, bugs and other contaminants. You can apply a high-quality car wax to your Harley’s body, using a microfiber towel. Leave it on for a few minutes, and then wipe off with a clean rag. If you are unable to clean the entire bike, you can also make repairs using sandpaper and a buffing tool.
When it comes to cleaning your Harley, it is important not to send it through a regular automobile wash. A dedicated Harley owner should follow proper cleaning practices. Also, you shouldn’t wash your bike straight after riding it. Wait until the engine has cooled down before you start washing the bike. Avoid spraying cold water on a hot engine as this can damage it. Lastly, you should polish the body of your Harley using a polishing paste.