Performing a tuneup on your motorcycle can help you get more out of it. Before you can start adjusting your carburetors, you must make sure that they are in good working condition and that everything related to engine service is in spec. Follow the instructions in your owner’s manual for proper adjusting. When adjusting the carburetors, blip the throttle after every touch of the sync adjuster.
Ensure that your carburetors are in perfect working order
Several factors can cause a carburetor to need rebuilding. For example, fuel may become varnish, clogging the small orifices and sticking to the parts. Often, this can result in problems like hard starts or hesitation on acceleration. Likewise, broken parts can cause poor economy and even the bike not to start. For these reasons, you should get your motorcycle checked by a mechanic on a regular basis.
Ensure that related engine service items are within spec before adjusting the carburetors
Before you attempt to adjust the carburetors on a motorcycle, you should ensure that all related engine service items are within spec. This includes adjusting the jetting, which is vital to the engine’s performance. You can learn more about the jetting process from this article. Once you’ve read it, you should know how to adjust the carburetors on a motorcycle.
Properly adjust the carburetor sync adjuster
To properly adjust the carburetor sync adjusters on a motorcycle, make sure that the throttle cables are loose and that the engine is at a modest low rpm. Then, pull the throttle cable sheath to test the free play of the cables. This should be about 3/32″ of free play all the way through the handlebar movement.
Blip the throttle after each touch of the tool to the sync adjuster
The key to proper throttle blipping is to understand the effects of engine braking on the front and rear tyres. Engine braking causes the rear tire’s contact patch to drag behind the front, pulling the rear wheel toward the front. To minimize engine braking, blip the throttle and ease out the clutch. Blipping the throttle will take some practice. When you have perfected this technique, you will know how to properly control your motorcycle’s speed.
Ensure that related engine service items are within spec before adjusting the carburetor sync adjuster
Before adjusting the carburetor sync adjustment on a motorcycle, ensure that related engine service items are within spec. Before doing this, make sure that the plug is clean and in good condition. Next, check the pilot and idle circuit. If this doesn’t work, consult with a professional motorcycle mechanic. When in doubt, consult a service manual.