How to Enlarge a Motorcycle Helmet?


The memory foam inside your motorcycle helmet will stretch over time and start to form to your head. It is this pad that presses against your head, which can be adjusted to a larger size by using a ball. A motorcycle helmet that has a liner made from EPS doesn’t expand when stretched. To enlarge your helmet, follow these simple steps. Changing the inner lining for a larger size will not cause any damage to the helmet’s integrity, and it can be done without taking it apart.

EPS liner doesn’t expand when stretched

The EPS liner is composed of small beads of polystyrene about the size of table salt. Under pressure, these beads expand two to fifty times their original size. This process forms a hard, flexible material with no bounceback or shrinkage, and the beads will never expand again. EPS is very light and durable and can be reliably manufactured using reasonable quality control procedures.

EPS foams have evolved over the last half-century. Manufacturers now have the ability to produce a helmet liner with harder and softer layers. The inner layer crushes on lesser impacts, while the outer layer resists the energy transfer. This feature makes it possible to produce a helmet liner with variable density, which makes it more resistant to cracking. Several motorcycle helmet manufacturers use this type of foam in their products.

EPS liner doesn’t expand when a motorcycle helmet is worn. A design student in London has come up with an alternative. Corrugated board is a material similar to cardboard, and can be shaped and tuned for lower g impacts. By making the liner stiffer, it will provide better protection against harder impacts. Consumer Reports’ test results have rated Smith Forefront’s EPS liner below seven conventional EPS-liner helmets.

In addition to EPS-liner, POC’s Octal X SPIN helmet is lightweight and features 21 vents, a chin strap, and a place to put your glasses. It also has Aramid reinforcements on the EPS liner to provide more protection. This helmet is very durable and comfortable, with over 4cm of vertical adjustment. If you’re in the market for a new helmet, be sure to check out POC’s Octal X Spin.

EPS lines are the best choice for motorcycle helmets because they absorb rotational forces. The softer foam near the head crushes first, while the denser foam gets involved in harder impacts. The conical shape of cones increases the density of dense foam as the cone moves downward. This means that the volume of the dense foam involved increases rapidly, stiffening the liner and keeping the helmet from bottoming out in the worst impacts.

Choosing a motorcycle helmet based on internal head shape

There are many factors to consider when choosing a motorcycle helmet. Choosing the proper size depends on the size of your head. If your head is smaller than average, a helmet with multiple shell sizes will look weird and uncomfortable. In addition, different sizes have different internal padding, which means you need to pay special attention to the internal shape of your head. When evaluating the internal shape of a motorcycle helmet, the first thing to consider is the overall shape of your head.

Before you purchase a motorcycle helmet, you need to determine your head shape. There are three basic head shapes: long oval, round oval, and intermediate oval. Some people’s heads are somewhere in between. If you don’t know your internal head shape, it’s best to ask a friend to take a photograph of your head from above. The hair should be flat and the head should be measured with a flexible measuring tape. Make sure to take a measurement from just above your eyebrows to the thickest part of your back.

Besides choosing the right size for your head, you should also consider the noise level of the helmet. The better a helmet can reduce noise, the less it will distract your hearing while riding. The same goes for ventilation. A helmet should provide adequate air flow, which will keep the inner lining dry and odor-free. The helmet should also fit well without any issues. If it doesn’t, you’ll end up with pain and headaches later.

The fit of a motorcycle helmet depends on the shape of your head. The right fit will reduce discomfort and protect you better in an accident. Make sure the helmet is comfortable to wear, as a tight helmet can cause pressure points and trigger a series of pressure points. On the other hand, a large helmet that doesn’t fit correctly will cause discomfort and not protect you as well as it should.

It is also important to check the chin strap fit. Do you feel pain and/or discomfort when wearing your motorcycle helmet? If you do, it’s time to try on a different one. Try it on and off the bike and see what you think. If you don’t feel comfortable, you should try a different helmet. If you don’t like the fit of your motorcycle helmet, try it on a different bike.

Changing the inner lining for a different size

If you want to wear a smaller or larger motorcycle helmet, you can change the inner lining by following a few simple steps. First, grab both chin straps and pull the helmet on. The helmet should fit tightly without gapping at the top or the cheeks. If you can feel space under the inner liner, you’ve got too large of a helmet. Next, you can try on a smaller or larger size motorcycle helmet to see how it fits.

Once you’ve figured out the proper size, you can wash and dry the liner. Using an antimicrobial detergent is ideal, as this will keep it from getting ruined by excessive heat. Be sure to use a low-heat setting to avoid damaging the liner fabric. If you have a dryer, air-dry the liner before you store it. Do not use the dryer for the liner because it will ruin the fabric.

Another trick to changing the inner lining is to use a different brand of cheek pads. If your motorcycle helmet is too small, you can buy a different brand of cheek pads that fit your new size. Many big reputable stores sell several styles of cheek pads. Before you buy your new helmet, take measurements of the crown of your head and compare them with the manufacturer’s size chart. If you are unsure of the exact size of your head, consider taking the measurements of your skull with a soft tape measure and buying a helmet from the store.

Changing the inner lining of your motorcycle helmet is easy and quick. Some manufacturers offer interchangeable cheek pads and inner linings. Then, all you need to do is swap the cheek pads. You’ll be glad you did! Just take the time to do it right the first time. It’s a great idea to change the inner lining and cheek pads when it comes to changing the size of your helmet.

Before you go on a long ride, break your new motorcycle helmet in by wearing it for at least 30 minutes every day. It will take up to 15 hours of daily use for the lining to conform to your face shape. This will also allow the helmet’s foam to continue to wear and deflate, making it a better fit against your face. When you have worn it for at least 15 hours, the lining should fit snugly in the helmet.

Choosing a modular helmet

When it comes to choosing a modular motorcycle helmet to enlarge, your first step should be to determine the size you require. Since there are many different styles of full-face helmets, you should take your aesthetic taste into consideration before making a final decision. Modular lids can range from retro and sporty to vintage-inspired and everything in between. To find the perfect helmet for you, start by reading the following reviews.

The shell material plays an enormous role in overall protective qualities, weight, and durability. Fiberglass is the standard material for most modular helmets, but more recent models are made from polycarbonate, composite, and carbon fiber weaves. Another important factor to consider is the chin-bar construction. If you plan to use the modular motorcycle helmet to enlarge your face, you will want to make sure that it is made from a lightweight material.

Whether you need a bigger or smaller helmet is important because the fit will be different for everyone. Using your own head measurements is the best way to determine the correct fit for you. The helmet should also be the right size to prevent injury. When comparing sizes, you should consider the shape of your head and your preference for a tighter or looser fit. Never assume that your head size will be the same across all brands. An XL may fit you well in one brand but not so well on another.

Modular motorcycle helmets are popular because they are versatile and protect your head and face. Many of them feature a removable chin-bar for easy access to fresh air. While this may not be ideal for everyone, some riders swear by them. However, you should consider that while modular helmets can provide greater safety, they can also limit your comfort. And you may not be able to use common motorcycle communication systems, such as a radio or comm kit.

Another important factor in deciding which type of modular helmet is right for you is the weight. A lightweight modular helmet can feel uncomfortable when you are wearing it all day. A heavy one, on the other hand, can be comfortable. The weight of modular motorcycle helmets varies, and you should consider your budget when choosing a model. But the extra money you invest in a quality modular motorcycle helmet will make it easier to wear and keep cool.

Leave a Comment

About intends to be a trusted partner for people (of course, riders) searching for authentic information, reviews, and guides about motorcycle parts and accessories. It brings you the best gear available and evolving technologies in the motorcycle industry.




Twin Cam





Sign up to receive the latest news and trends from our blog.

More questions? Get in touch