If you’re new to repairing and customizing leather motorcycle lever covers, this article will show you how to clean and install get-back whips. This article will also show you how to restore leather get-back whips if they’ve seen better days. Then, you’ll be able to enjoy your custom lever covers for years to come! This article will provide you with a few tips and tricks for getting the best results possible!
Get-Back Whips
If you ride a motorcycle, you’ve probably seen a Get-Back Whip. This device is designed to stop another vehicle from hitting you, and it is primarily used as a protection against cars. While it’s not legal in most states, it is not uncommon to see bikers carrying long ropes attached to their handlebars. While it may not be illegal, some motorcycle clubs don’t approve of the use of getback whips for aesthetic purposes. Purchasing one to look good will not be acceptable in these cases, but there are a few reasons that you may want to buy a permanent whip for your motorcycle.
Originally, get-back whips were used as motorcycle safety devices that would alert other drivers that a biker was in the area. However, nowadays, they’re simply considered a decorative accessory. You can buy them from online stores and customize them to fit your motorcycle perfectly. Many of them feature the company’s logo or the name of a loved one on them. If you want to personalize your whip, it’s recommended that you purchase one with a metal lug.
Installing get-back whips
Motorcycle get-back whips have long been used as a self defense tool. They’re made of leather, and they can be easily attached to handlebars, front brake levers, and clutch levers. Unlike a chain, however, get-back whips can easily be removed with a hard yank. Unlike a chain, get-back whips are also completely concealed and tucked away – ideal for motorcycle riders who don’t want to be seen.
While installing get-back whips on motorcycle lever covers may seem tricky, the supplies needed are very inexpensive and easily available. To make a two-foot whip, you will need two cords that are each 27 feet long. If you plan to make a longer whip, you will need more cords. The history of the get-back whip is rumored to go back to the days of the “old west,” when cowboys used fringes to keep rain off their clothes.
Cleaning get-back whips
Motorcycle riders have an advantage when riding. For years, motorcycles were the only vehicles with constant headlights, but today, nearly every vehicle has daytime running lights. Using IronBraid whips on your motorcycle will make you stand out to drivers. They also won’t slap you or your passenger. They can be attached to your motorcycle’s brake lever with a Panic Snap.
Motorcycle riders have been using get-back whips for decades to warn other drivers. They are a way to advertise your motorcycle club, project an attitude, or increase visibility. These accessories typically cost between $40 and 55. While they may look like a decorative accessory, they can be dangerous when not maintained properly. You should always wash them regularly to avoid damage to your motorcycle. You can purchase replacements from various online motorcycle accessory stores.
If you’ve attended a motorcycle rally in the past, you’ve probably seen a vendor selling motorcycle get-back whips. Whips can be purchased separately or as a set. These accessories attach to your motorcycle levers using clips. If you are not careful, the whip can damage your motorcycle brake master cylinder and prevent it from working properly. Clean it as soon as possible to avoid the problem.
Restoring leather get-back whips
Restoring leather get-back whips on your motorcycle lever covers can be done in a few different ways. The first step is to measure the length of the whip, which is usually about four or five inches. The length is crucial because the whip can be too long and interfere with the operation of the motorcycle, so be sure to measure it correctly. Also, remember that whip strands are prone to getting caught in the wheel or chain. Generally, get-back whips are 24 to 48 inches long, but you can purchase them in shorter lengths if desired.
You may have noticed a motorcycle rally vendor selling these whips. These whips can be attached to your brake or clutch levers with clips. While they are a decorative accessory, they were originally made for safety reasons. They are also great for attracting the attention of other drivers! You can even use them as a weapon in a dangerous situation. These whips can be very effective when used properly.