If you’re wondering how does a Harley Davidson security system work, this article is for you. We’ll talk about the key fob, PIN code, Motion sensors and the Smart Siren II package. Once you have an idea of how your security system works, you can decide which features are most important to you. Then, you can go ahead and buy them! Just remember to follow the manufacturer’s instructions carefully, as you will need to change your PIN code after installation.
Key fob
The key fob of your Harley Davidson security system should be programmed with your vehicle’s unique frequency and is programmed to your vehicle’s Smart Security System module. In case you lose or misplace your key fob, you can simply order a replacement key fob. A dead battery can also be replaced at Harley Davidson. For further information, please visit their website. It is recommended to read the manual of the vehicle that comes with the security system.
The Smart Security Module of Harley Davidson motorcycles has been available for quite some time now. It is a remote-controlled, waterproof device that works with rolling code technology to prevent unauthorized entry into the motorcycle. This security system allows riders to start the motorcycle without using a key, and it deactivates the security features automatically when the owner is nearby. There are some disadvantages to this security system, however.
PIN code
A key fob used with the Harley Davidson security system can be removed and replaced. The key fob is an electronic device that allows the bike to start when it is in close proximity to the key fob. Changing the PIN code is simple, but it is important to remember it or keep it somewhere accessible. To change the PIN code, press the left turn signal button three times. This will allow you to change the code and re-arm the smart security system.
Some models of the Harley Davidson security system are designed with simple configuration, and most of these bikes have a proximity fob that is connected to the security system. Once you have the fob, you can start your motorcycle. To troubleshoot the security system, you can follow the steps below. You can also contact the manufacturer or dealer to get a replacement fob. Make sure to get a replacement key fob before you try troubleshooting your Harley’s security system.
Motion sensors
When you buy a Harley Davidson security system, you are not only purchasing a security system but also a key fob or PIN to operate it. You also have the option of programming the key fob or PIN to the frequency set by the smart security module. In case you lose the key fob, you can simply order a replacement or a new one from the dealer. These devices are easy to use and don’t require the assistance of a professional.
You can easily reset the system at Harley Davidson. To do this, you need to remove the battery and turn on the ignition. In addition, the hazard lights are still flashing even if you turn off the engine. Moreover, if the security system is set to alert you if someone tries to break in, it will prevent you from using your turn signals. If you do not want to be bothered with a security system, you can easily remove the battery by disabling it first.
Smart Siren II package
The Harley Davidson Smart Siren II package builds on the factory security system by adding a pager transmitter and enhanced sound chamber. It is capable of confirming commands from a Security System Fob, including triggering the siren. This package is an excellent choice for anyone who wants to keep their bike safe. There are several ways to upgrade your security system, including a wireless keychain transmitter for even more control.
First, you can test your security system without the siren. To test it, connect it to another bike. The siren should sound when it detects tampering. Make sure to test it with another bike to confirm that it is not defective. If the siren is working fine, check the security system to make sure everything is set. If not, it is time to upgrade to a new model.